New Machine Build PM940 5 axis build

Results 1 to 3 of 3

Thread: PM940 5 axis build

  1. #1
    Member
    Join Date
    Jan 2018
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default PM940 5 axis build

    I am working on a 5 axis PM940 based around a 12" bridgeport rotary table for the c axis and some wheel hub bearings for the a axis. The large Z travel of the 940 and wide table makes this setup feasible. I am using fusion 360 and linuxcnc. I am wondering whether linuxcnc kinematics support dynamic work offset. Still reading through the code. I've made a vr180 video of the hardware so far and am curious about your thoughts: https://youtu.be/4_pkakOSfuM

    Similar Threads:


  2. #2
    yakupyavuz34's Avatar
    Join Date
    Dec 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    I watched your video. are successful



  3. #3
    Member
    Join Date
    Jan 2018
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: PM940 5 axis build

    Still working on this, new panel. New dual worm drives for the A axis, zero backlash. Currently working on a new PM940 input shaft for a bluemax 1hp motor. I also received two more PM940's to convert to regular 3 axis CNC. Using linuxcnc for everything
    PM940 5 axis build-116261685_10215535831102744_3810597159323198065_o-jpg

    Attached Thumbnails Attached Thumbnails PM940 5 axis build-116261685_10215535831102744_3810597159323198065_o-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

PM940 5 axis build

PM940 5 axis build