Need Help! tl410c


Results 1 to 2 of 2

Thread: tl410c

  1. #1
    Member black88's Avatar
    Join Date
    Jul 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default tl410c

    Hello, everyone,
    I've had my own laser cutting machine with the tl410c board on board for 4 days and I can't get a decent result.
    Let me explain the problem:
    I assembled all the hardware, I installed the drivers and the software coreldraw and autolaser v 2.3.5. By simply drawing a square or a circle and sending it to the machine by autolaser, I get a rectangle and an oval respectively. As if on the x-axis it crushed the content. Thanks in advance to those who can help me.



  2. #2
    Member black88's Avatar
    Join Date
    Jul 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: tl410c

    up



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

tl410c

tl410c