Aligning mirrors on Chinese 60W laser


Results 1 to 2 of 2

Thread: Aligning mirrors on Chinese 60W laser

  1. #1
    Registered
    Join Date
    Aug 2016
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Aligning mirrors on Chinese 60W laser

    God day everyone, the other day I tried to align mirror on laser head on Chinese 60W laser as I tought it may improve efficiency but it hapend oposite. Now I can not cat 5mm playwood that i could do before. I used masking tape method on head where burnt circle appear. I tried to tune it as posiible to be in circular shape. Now when machine is not working I can see red dot on floor of machine to be in egg shape, it is noticable as it is far from head of laser. My question is does this out of shape light means that aligment is not complete and should that be adjusted in mor circular shape. Also if you could provide good tutorials how to adjust mirrors to work correctly? I adjusted miror on top of head only , not toching others. Thank you.

    Similar Threads:


  2. #2
    jebsmith2112's Avatar
    Join Date
    Aug 2018
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    An egg shape to me indicates you may be hitting your air assist nozzle.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Aligning mirrors on Chinese 60W laser

Aligning mirrors on Chinese 60W laser