Need Help! Kuka KRC 1 windows / driver install

Results 1 to 2 of 2

Thread: Kuka KRC 1 windows / driver install

  1. #1
    Member kirsikivi's Avatar
    Join Date
    Jan 2015
    Location
    viljandi
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Kuka KRC 1 windows / driver install

    I bought 4 Kuka Krc1 (150,180,200) robots.
    They came from a Volkswagen factory.
    But they arrived without the hard drives.
    The seller later sent some random drives,
    all of them have different hardware drivers and installers.
    On each of the hard disks D: drives are Windows installers and different hardware drivers.
    What are the main drivers to get the robot moving?
    Is it possible to retrofit Windows XP to replace Windows 95?

    Similar Threads:


  2. #2
    Member
    Join Date
    Aug 2005
    Location
    United States
    Posts
    205
    Downloads
    2
    Uploads
    0

    Default Re: Kuka KRC 1 windows / driver install

    You may want to put these questions to the folks on this industrial robot forum;

    https://www.robot-forum.com/robotforum/

    Usually someone will chime in with useful info.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Kuka KRC 1 windows / driver install

Kuka KRC 1 windows / driver install