Wooden floor? Tram the head? I'm not sure I'm seeing this. Simple isolators? Platform mounts?
What are people using for the feet on the Raptor? George said the threading is M8, I see some rubber bumpers and on occasion elevator bolts, but is there something that works or doesn't work? Too much vibration = movement, etc??? Where to find these?
Similar Threads:
Wooden floor? Tram the head? I'm not sure I'm seeing this. Simple isolators? Platform mounts?
I have used hockey pucks! I was afraid I would get flamed for suggesting this. Well done!
Don't give me to much credit, haha. I think I saw this suggested somewhere on this site. It was cheap and works good so far.
lol, lets machine stuff!
Puck works good , you can also make pocket in stand top to have the puck sit in.
XZero cnc
Yes, I know about the change in size of the bolts, let me know if ya need a set of M12 carriage bolts. lol
Well done! there's a post here you may want to read. See if i can find it...
http://www.cnczone.com/forums/genera...e-redneck.html
It's that. Budget can be a b|tch. (didn't like me saying *****) lol
Redneck engineering rules;
1- Beyond safety, there are no rules, you bend the rules and make it work.
2- A part in the hand, is worth two in town.
3- When in doubt, use more bailing wire, duct tape and steel
4- The right tool, is the one you have with you.
5- Yes you can make a pump diaphragm from a plastic bottle.
6- It does not have to be pretty, it just needs to work.
7- When it does not work, refer to rule #1