Leveling Feet - size M8


Page 1 of 2 12 LastLast
Results 1 to 12 of 13

Thread: Leveling Feet - size M8

  1. #1
    Registered firewire's Avatar
    Join Date
    Dec 2014
    Posts
    41
    Downloads
    0
    Uploads
    0

    Default Leveling Feet - size M8

    What are people using for the feet on the Raptor? George said the threading is M8, I see some rubber bumpers and on occasion elevator bolts, but is there something that works or doesn't work? Too much vibration = movement, etc??? Where to find these?

    Similar Threads:


  2. #2
    Registered stucapco's Avatar
    Join Date
    Feb 2015
    Posts
    174
    Downloads
    0
    Uploads
    0

    Default Re: Leveling Feet - size M8

    Wooden floor? Tram the head? I'm not sure I'm seeing this. Simple isolators? Platform mounts?



  3. #3
    Registered firewire's Avatar
    Join Date
    Dec 2014
    Posts
    41
    Downloads
    0
    Uploads
    0

    Default Re: Leveling Feet - size M8

    See the attached picture. The green feet on each corner. These look great, just haven't found them online yet. I plan on resting the router on a 3/4" plywood bench.

    Leveling Feet - size M8-feet-jpg



  4. #4
    Registered
    Join Date
    May 2014
    Location
    USA
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: Leveling Feet - size M8

    I put mine on hockey pucs, m8 carrige bolts, nuts, washers. Drill enough of the puck with a forstner bit to sink the carrige bolt

    Leveling Feet - size M8-dscn2156-jpg



  5. #5
    Registered firewire's Avatar
    Join Date
    Dec 2014
    Posts
    41
    Downloads
    0
    Uploads
    0

    Default Re: Leveling Feet - size M8

    Quote Originally Posted by midnightbluel81 View Post
    I put mine on hockey pucs, m8 carrige bolts, nuts, washers. Drill enough of the puck with a forstner bit to sink the carrige bolt

    Leveling Feet - size M8-dscn2156-jpg
    Interesting and creative! Very good! Thank you for sharing!



  6. #6
    Registered stucapco's Avatar
    Join Date
    Feb 2015
    Posts
    174
    Downloads
    0
    Uploads
    0

    Default Re: Leveling Feet - size M8

    I have used hockey pucks! I was afraid I would get flamed for suggesting this. Well done!



  7. #7
    Registered
    Join Date
    May 2014
    Location
    USA
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: Leveling Feet - size M8

    Don't give me to much credit, haha. I think I saw this suggested somewhere on this site. It was cheap and works good so far.



  8. #8
    Registered stucapco's Avatar
    Join Date
    Feb 2015
    Posts
    174
    Downloads
    0
    Uploads
    0

    Default Re: Leveling Feet - size M8

    lol, lets machine stuff!



  9. #9
    Member gio666's Avatar
    Join Date
    May 2008
    Location
    Canada
    Posts
    4059
    Downloads
    0
    Uploads
    0

    Default Re: Leveling Feet - size M8

    Quote Originally Posted by firewire View Post
    See the attached picture. The green feet on each corner. These look great, just haven't found them online yet. I plan on resting the router on a 3/4" plywood bench.

    Leveling Feet - size M8-feet-jpg
    Those are M12 on that Raptor, newer Raptors has M8

    XZero cnc


  10. #10
    Member gio666's Avatar
    Join Date
    May 2008
    Location
    Canada
    Posts
    4059
    Downloads
    0
    Uploads
    0

    Default Re: Leveling Feet - size M8

    Puck works good , you can also make pocket in stand top to have the puck sit in.

    XZero cnc


  11. #11
    Registered
    Join Date
    May 2014
    Location
    USA
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: Leveling Feet - size M8

    Yes, I know about the change in size of the bolts, let me know if ya need a set of M12 carriage bolts. lol



  12. #12
    Registered firewire's Avatar
    Join Date
    Dec 2014
    Posts
    41
    Downloads
    0
    Uploads
    0

    Default Re: Leveling Feet - size M8

    Hockey pucks worked perfect!!!!

    Thank you for the suggestion!

    Leveling Feet - size M8-img_0944-jpg



Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Leveling Feet - size M8

Leveling Feet - size M8

Leveling Feet - size M8