- Need Help!- Viper xz 30x24 build question
-
Registered
-
-
Member
Re: Viper xz 30x24 build question
Scott
If you go to Georges web site there is a photo under table top section. Link Table top installation
they bolt to the side of the 80 x 80 rail then the t top attaches to the angle.
I have demon and the machine it self if Immpressive. the Only mistake I made was making to small but you have to start some where
Kirk
-
Registered
Re: Viper xz 30x24 build question
Thanks Kirk, Thank you for the link. I purchased the Viper to perform one small operation (a 2" slot in MDF). After getting this one I'm ready to order a larger one.
Scott
-
Member
-
Registered
Re: Viper xz 30x24 build question
-
Member
Re: Viper xz 30x24 build question
The Viper machines you can also drill the top and attach to 8080 profiles. but Raptor machine mounting to profiles does not work out all the time.
- Need Help!- Viper xz 30x24 build question
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules