creo 3.0 4 axis cutline milling

[fsa]

Respected

i machine a turbocharger compressor wheel ..although the part is five axis approach but due to axis loon on my machine i have to limit me on 4 axis approach through cutline milling ..every this is look good till i verify program on vericut ..(cl verification)...but when i check gcode on vericut they show there are lot of gauges ....i feel its due to post processor ..and unfortunately but able to resolve of this issue because of limited knowledge of post processor ...please need help ...if you need manufacturing file i can upload it...also can upload post processor

regards
\
fisa

Similar Threads:

• Need Help!- post 5 axis fanuc 18i in creo or proe please
• Open Source : 4 axis and 5 axis print with a 3 axis milling in order to have a 5 axis
• creo 4 axis postprocesor for haas
• creo tool setup 4 axis - tool GAUGE Z lenght
• creo NC postprocesor for 5 axis for haas vf

[SHAKEEL0311]

I ALSO NEED HELP OF CNC 4TH AXIS POSTPROCESSOR...I USE PRO-ENGINEERING