creo 4 axis postprocesor for haas

Results 1 to 2 of 2

Thread: creo 4 axis postprocesor for haas

  1. #1
    Registered
    Join Date
    Jul 2013
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default creo 4 axis postprocesor for haas



  2. #2
    Member dharmic's Avatar
    Join Date
    May 2015
    Location
    Australia
    Posts
    1422
    Downloads
    0
    Uploads
    0

    Default Re: creo 4 axis postprocesor for haas

    If you're in the manufacturing mode (ie you're in a manufacturing/NC file), you can go via the Applications panel on the ribbon to "Post Processors" (I think, don't have it open at the moment). It'll open a java application which allows you to clone and modify your current Haas post definition to give it 4th axis capabilities.

    It takes a while but it's there if you can't get one off the shelf.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

creo 4 axis postprocesor for haas

creo 4 axis postprocesor for haas