- Direct Color Systems 7200z Issues
-
Member
Direct Color Systems 7200z Issues
I'm having a lot of issues with my DCS 7200z. When I print tactile, it usually puts down a clear primer, followed by the white ink. All of a sudden, it's printing magenta. Magenta is nowhere on the file. All of my tanks are full and filled with the proper inks/tints. This is a new issue for me.
I can print clear ink. I do it with braille. But now when I print, I have to a normal clean in maintenance. Otherwise it mixes the clear ink with a black tint - no black is used on my runs. Once it's cleaned, then it prints clear braille with no issues.
This is driving me insane. I've tried restarting the machine and my computer. I've changed all the settings back to default. It's still printing magenta for clear with tactile.
Similar Threads:
-
-
Re: Direct Color Systems 7200z Issues
I don't know where you are with your 7200 but We offer support and service for that machine. Tritecusa.com is my site and can service any machine anywhere.
- Direct Color Systems 7200z Issues
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules