Planning to build fabric cutter

Results 1 to 7 of 7

Thread: Planning to build fabric cutter

  1. #1
    Registered
    Join Date
    Jul 2012
    Location
    Denmark
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Planning to build fabric cutter

    Hi everybody first post

    Since i dont have $30k to spend on a fabric cutter i plan to build my own like this one... (Carlson Pro)

    Carlson Design – Plotter Cutters – Pro Plotter Cutter

    Since this will be my first build i need some advice on motor and drivers.

    X-axis is driven by 2 motors - one at each end of gantry, direct drive on track.
    Y-axis is 1 motor - direct drive on gantry track.
    Z-axis will be pneumatic up/down.
    Tangential control of cutter head will be motor driven.

    See vid in above link for details.

    What i need is some advice on what type and size of motors and drives to use, from one of you more experienced guys.

    Any ideas out there ?

    Cheers
    Jakob

    Similar Threads:


  2. #2
    Registered
    Join Date
    Oct 2010
    Location
    Romania
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default

    Welcom to Forum!
    You may inspire from Mech Mate projects, only for fabrics, you make a machine much lighter, depending on fabrics you want to cut, is necessary a vacuum table and a tangential oscillating knife, software for driving the machine and software for nesting and CAD, all of this may cost you pretty much.
    How big you intend to build your machine? Aluminium profiles, guides, drivers and motors, belts and rack/pinions are very expensive if you want a big machine, for precision you need a stiff machine, is possible to spent almost 10k eu depending on sources for materials and some labor if some parts you not be able to do in house.



  3. #3
    Registered
    Join Date
    Jul 2012
    Location
    Denmark
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Thanks dorinspeedy.

    I will only be cutting leightweight nylon ripstop (spinnaker).

    Size will be 1,9m wide with an active working width of 1,65m. Table will be 6-8m long, I am not totally decided on length yet. Im thinking cutting/idle speeds of up to 0,2 m/s (.66 fps)

    I have the table design covered, and I plan to copy the Carlson design with a single aluminium rail on each side with traction belt glued to it, and a traction wheel directly mounted on the two X motors.

    Here is some details on what materials Carlson use as traction belt and wheel..
    Carlson Design – Plotter Cutters – Plotter Accessories – Spare Parts – Direct Drive Wheel
    Carlson Design – Vacuum Tables – Table Accessories – Supertrack – Track Belt

    Since this is a hobby project i dont need nesting sw. I allready have intelliCAD with DXF capabilities. So what i really need is CAM sw and mach3, and teach my self skills to use them.

    I had a quick look at Mech Mate site as you suggested, but that thing is way too solid as I see it, but I will have a look through the site for inspiration.

    Well, back to my original question..
    I am fairly confident about what I need and how to design and manifacture what I want - the only thing I dont have clue about is which motors and drivers to choose - here I really could use some pointers.

    Cheers
    Jakob



  4. #4
    Registered
    Join Date
    Oct 2010
    Location
    Romania
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default

    I d'ont know what sources of motors you may have, I will use on X axis, 2 motors with 3Nm and the same on Y axis, on A axis (tangential) 1.5-2Nm, drivers independent on each axis ones with 4-5Amps will do the job and a board (with some relays on it for other commands) for connecting all with computer on parallel port. Using separate boards may help you with troubleshoting later. You may search on eBay.



  5. #5
    Registered
    Join Date
    Jan 2014
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Re: Planning to build fabric cutter

    Did you ever complete your fabric cutter plotter?

    If you completed your machine...what software controller and cam software did you use?



  6. #6
    Member raifdsgn's Avatar
    Join Date
    Mar 2019
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Planning to build fabric cutter

    really I need help to build the same machine,please help me choose electric components,for Aluminium structure I don't have problems
    but for control box,I am not professional
    thanks in advance



  7. #7
    Member raifdsgn's Avatar
    Join Date
    Mar 2019
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Planning to build fabric cutter

    dear Jakob
    have you done this machine,please help me to find proper electronics for control box
    best regards
    Raif



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Planning to build fabric cutter

Planning to build fabric cutter