This is largely up to the CAM program The setup you have is a full 3 axis machine (4 if you have the optional 5th driver and motor )
It runs what ever g-code you can generate. SheetCAM is not a 3D or even quasi 3D program. It won't let you do sculpted tops , V carving or 3D to a watermark. For those things you need a program like Vcarve Pro or Aspire
Your milling program might work but you need a MACH3 POST for it. To get a Gun stock you cannot cut with just a 2.5 D unless you want to just get a really rough cut version and finish it by hand
Ther eis nothing wrong with doing the quasi 3D and cutting to a watermark and rotating it 180 degs and cutting the other side but you cannot do that with SheetCAM and you cannot get any cut that has to be made with the tool not at 90 degrees
A full 3 D 4 axis software would let you design the object with cuts on the sides as well .
TOMcaudle
Home