- Suppliers / Partners needed for MEA Handling in automated production
-
Suppliers / Partners needed for MEA Handling in automated production
We are looking for suppliers and partners for the following project:
In principle, the project is about the production of membrane electrode assemblies (MEA).
A system for handling one membrane and two differently coated electrodes is to be planned and realised.
In the initial state, the electrodes are rolled up on foil (Kapton). These electrode rolls are first cut into individual sheets and placed in magazines.
These cut parts (one sheet of electrode A / one sheet of electrode B / one sheet of membrane) are put together in a corresponding arrangement as a "sandwich" by the system to be realised.
The resulting "sandwich" must be fixed after folding to prevent the 3 "sandwich layers" from slipping in relation to each other.
The "sandwiches" are then automatically placed in a magazine.
Please reply to this thread to set up connections between you and the enquirer.
-
- Suppliers / Partners needed for MEA Handling in automated production
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules