Syntec 210MA W/two multi-thread synch spindles (3 Axis), InventorCAM Postprocessor

[Flybyq]

Hi,

I'm very new to this, looking to order a Syntec 210MB controller CNC with two synchronized spindles to machine simultaneously travelling on a rail in the X-axis for long and skinny door parts. Is there an InventorCAM or Fusion 360 post processor available to post code for different profiles that can be input for each head separately (blocks, on same NC file) and run both heads, without manually having to paste the code in a master program. Has someone written a post processor for this application?

thanks, any help/guidance much appreciated.

Similar Threads:

• Postprocessor SolidCAM (InventorCAM)
• Ref All Home, Slaved axis does not synch.
• Syntec multi drill
• Multi spindles and nc studio 10v
• Mazatrol T Plus thread cycle in synch?

[Maroslav4]

Hello,

if it is still actual, write me PM or on email m.skotak@ccsoftcz.com