Postprocessor modification

Results 1 to 2 of 2

Thread: Postprocessor modification

  1. #1
    Member
    Join Date
    Feb 2006
    Location
    slovenia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Postprocessor modification

    Hello,

    Can anybody help me with postprocesor modification for mastercam lathe with live tooling.(fanuc post)
    When I use cross driling I receive wrong tool number:
    Should be like T0808- I receive in program T0800. I found out that postprocesor take diameter offset instead lenght offset.
    For the drills diameter offset is zero and I receive 00...
    I attached also post in word document.

    Thank you for help,


    Regards, dami

    Similar Threads:
    Attached Files Attached Files


  2. #2
    Member
    Join Date
    Feb 2006
    Location
    slovenia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Postprocessor modification

    Hello,

    I forget to mention that I use Mastercam X5 software.
    Can Anybody help me with this??

    BRD



  3. #3

    Join Date
    Aug 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Postprocessor modification

    send me post, i'll see
    [email]serezhk@yahoo.com[/email]



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Postprocessor modification

Postprocessor modification

Postprocessor modification