Creating post processor

Results 1 to 2 of 2

Thread: Creating post processor

  1. #1
    Member kickinger's Avatar
    Join Date
    Nov 2004
    Location
    Steyrermühl
    Posts
    153
    Downloads
    0
    Uploads
    0

    Default

    Hello

    What program do I need to change or create a post processor of Virtual Gibbs?

    Kiki

    HAAS VF7 - BJ2008<br />HAAS ST20<br />HAAS Mikron VCE1000<br />EMCO 365<br /><br />www.KDC-Technik.at


  2. #2
    Registered eintracht-fan's Avatar
    Join Date
    May 2007
    Location
    Eisenhausen
    Posts
    156
    Downloads
    0
    Uploads
    0

    Default

    Hello
    There’s Posthaste Editor integrated in Gibbs. You can create easy post processors with it.

    Complexer post processors can be written only by the manufacturer.

    What PP do you need?



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Creating post processor

Creating post processor

Creating post processor