- Problem- Masterwood Winner CN12
-
*Registered User*
Masterwood Winner CN12
I've problem with Post Processor:
If I insert these variables in machine, I get the work mirrored in Y, Origin(zero) must be in up left corner.
:
+================================================
VAR LINE_NUMBER = [N|A|N|1.0]
VAR SPINDLE_SPEED = [S|A|S|1.0|0.001]
VAR FEED_RATE = [F|C|F|1.0|0.001]
VAR X_POSITION = [X|C|X|1.2]
VAR Y_POSITION = [Y|C|Y|1.2]
VAR Z_POSITION = [Z|C|Z|1.2|-1]
VAR X_HOME_POSITION = [XH|A|X|1.2]
VAR Y_HOME_POSITION = [YH|A|Y|1.2]
VAR Z_HOME_POSITION = [ZH|A|Z|1.2|-1]
VAR ARC_RADIUS = [Radius|A|R|1.2]
VAR PLUNGE_RATE = [E|C|E|1.0|0.001666]
+================================================
Which is the error in these variables?
Similar Threads:
Last edited by alfre9654; 11-07-2018 at 03:09 PM.
-
- Problem- Masterwood Winner CN12
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules