Problem Masterwood Winner CN12


Results 1 to 1 of 1

Thread: Masterwood Winner CN12

  1. #1
    *Registered User* alfre9654's Avatar
    Join Date
    Nov 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Exclamation Masterwood Winner CN12

    I've problem with Post Processor:

    If I insert these variables in machine, I get the work mirrored in Y, Origin(zero) must be in up left corner.
    :
    +================================================

    VAR LINE_NUMBER = [N|A|N|1.0]
    VAR SPINDLE_SPEED = [S|A|S|1.0|0.001]
    VAR FEED_RATE = [F|C|F|1.0|0.001]
    VAR X_POSITION = [X|C|X|1.2]
    VAR Y_POSITION = [Y|C|Y|1.2]
    VAR Z_POSITION = [Z|C|Z|1.2|-1]
    VAR X_HOME_POSITION = [XH|A|X|1.2]
    VAR Y_HOME_POSITION = [YH|A|Y|1.2]
    VAR Z_HOME_POSITION = [ZH|A|Z|1.2|-1]
    VAR ARC_RADIUS = [Radius|A|R|1.2]
    VAR PLUNGE_RATE = [E|C|E|1.0|0.001666]

    +================================================


    Which is the error in these variables?

    Similar Threads:
    Last edited by alfre9654; 11-07-2018 at 03:09 PM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Masterwood Winner CN12

Masterwood Winner CN12