Which pp to choose for arduino grbl?


Results 1 to 3 of 3

Thread: Which pp to choose for arduino grbl?

  1. #1
    Registered
    Join Date
    Apr 2006
    Location
    US
    Posts
    40
    Downloads
    0
    Uploads
    0

    Default Which pp to choose for arduino grbl?

    I am going to use an arduino with grbl to control my cnc. Which post processor can I choose to generate the correct gcode?

    Thanks

    Similar Threads:


  2. #2
    Member dbhughe's Avatar
    Join Date
    Mar 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Which pp to choose for arduino grbl?

    My experience with GRBL has been good overall.

    I have used Mach 3 as a post and edited the g-code file to remove tool change commands.

    Several G-code senders will report back errors that GRBL doesn't like. Usually just deleting the offending line will allow it to run.

    Good luck with your endeavors.



  3. #3
    Member ZASto's Avatar
    Join Date
    Apr 2005
    Location
    Vanuatu
    Posts
    304
    Downloads
    3
    Uploads
    0

    Cool Re: Which pp to choose for arduino grbl?

    I use the attached one.
    Just remove ".txt" from the file name and place it in the PostP folder (or My_PostP folder).

    Attached Files Attached Files
    Make no mistake between my personality and my attitude.
    My personality is who I am. My attitude depends on who you are.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Which pp to choose for arduino grbl?

Which pp to choose for arduino grbl?