- Updating MACH3 post from MCX 2017 to 2019 got message ; “will not be performed" ?
-
Member
Updating MACH3 post from MCX 2017 to 2019 got message ; “will not be performed" ?
Tried to ALT+C updatepost in Mastercam 2019 ( from a working post in MCX-2017) and got this :
#6 - 15 Aug 2022 09:38:44 AM - The post text section has no section start marker. Updating
the post processor will not be performed.
And yet, it been working fine in Mastercam 2017 past.....5yrs !
Anyone can help / knows how to fix this ?? ( or, has a Mach3 post for MasterCam 2019?)
Thank in advance, Robert
Similar Threads:
-
- Updating MACH3 post from MCX 2017 to 2019 got message ; “will not be performed" ?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules