A standard Fanuc post works with some editing .When threading I use G32 the Fanuc post an E for the Feed change those E to F other than that I dont have to change much guess it just depends how many axis your using and what your machine is doing .
1st, should be; does anyone knows if there such thing, a Post P from MC-2022 to post on Mach3 ?
I know Mach3 is passé, but still have it & enjoy it after 15yrs.
Tried to migrate from MC2017 to MC2019.....will simply not ??
Any leads, direction would be much appreciate.
Thanks
Similar Threads:
A standard Fanuc post works with some editing .When threading I use G32 the Fanuc post an E for the Feed change those E to F other than that I dont have to change much guess it just depends how many axis your using and what your machine is doing .
Thks gab !....will see how & if !!,
Since not my "expertise" to play (changing post steps) output ( or the processor programming output) !..... would rather / hope for continuing using simple Mach3 PP
But a guess, like many, much evolve that part to
From the g-code editor .under edit , use the replace all fuction.