- Mastercam post for pathpilot lathe SL15
-
Member
Mastercam post for pathpilot lathe SL15
I'm an old user of Mastercam (stuck on X8), no more new software or maintenance. I will probably close the shop in a couple of years.
Every post-processor for lathe output G code that Pathpilot does not recognize.
I would like to remove the G00 before the tool change. Replace G00 T0101 with only T0101
Output G30 for tool change position
Remove G50 for maximum spindle RPM and replace with D, something G96 S600 D2000 M03
I would gladly pay someone to edit a Post-Processor
Thanks
I tried to do it myself but I don't really have time for that.
Thanks for any help. Like I said, I'm ready to pay for someone's time and effort
Similar Threads:
-
- Mastercam post for pathpilot lathe SL15
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules