Need Help! POST PROCESSOR FOR OKUMA LATHE


Results 1 to 4 of 4

Thread: POST PROCESSOR FOR OKUMA LATHE

  1. #1
    Member dungkhoi's Avatar
    Join Date
    Apr 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default POST PROCESSOR FOR OKUMA LATHE

    Hello Sir!
    Could you give me the Post Processor For Okuma Lathe (Machine OKUMA LB3000 or OKUMA LB4000).
    Thank you so much.

    Similar Threads:


  2. #2
    Activation process
    Join Date
    Sep 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: POST PROCESSOR FOR OKUMA LATHE



  3. #3
    Activation process
    Join Date
    Sep 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: POST PROCESSOR FOR OKUMA LATHE

    Do you have a sample program on that machine?
    What your Mastercam version do you use?



  4. #4
    Member Dnguyen91's Avatar
    Join Date
    Oct 2021
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: POST PROCESSOR FOR OKUMA LATHE

    Hi sir,
    Could you give me the post processor for Okuma lathe 4axis ( Okuma LB 3000 or Okuma LT 3000 ). I’m learning and working thats machine. Thank you.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

POST PROCESSOR FOR OKUMA LATHE

POST PROCESSOR FOR OKUMA LATHE