New Machine Build OMNITECH 1530 / Syntec 6MB

Results 1 to 2 of 2

Thread: OMNITECH 1530 / Syntec 6MB

  1. #1
    Activation process matthewomeara's Avatar
    Join Date
    Dec 2018
    Posts
    15
    Downloads
    0
    Uploads
    0

    Default OMNITECH 1530 / Syntec 6MB

    I will be receiving a new OMNITECH 1530 CNC linear ATC next week with the Syntec 6MB controller. I'll be putting to rest a 1994 Digital Tool Meta Machine. I have MasterCAM X that I've been running since 2010. I'd like to continue to use it with the new CNC. I was hoping to pay my local MasterCAM reseller to create a post for me, but they won't do it for MasterCAM X. My question is how hard is it to create a post for this new machine? Time is money. I'd rather spend my time cutting parts. Thought I'd ask here before I spend 40 hours trying to figure it out only to realize it's a bigger task that I expected.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jan 2018
    Location
    United States
    Posts
    38
    Downloads
    0
    Uploads
    0

    Default Re: OMNITECH 1530 / Syntec 6MB

    No need to create a new post. Just use a Fanuc 0M post that should already be available.

    The only change will be switching G20/G21 to G70/G71 when switching between inch/mm.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

OMNITECH 1530 / Syntec 6MB

OMNITECH 1530 / Syntec 6MB