heloo respectfull frnds..frnds i need heidenhain tnc 151 post processor for mastercam X5..
Currently my post will call out the feedrate on the 1st g01 line, but subsequent G01 lines will NOT display the feedrate. I would like for the post to show the feedrate everytime a G01 is called.
I have no experience writing a post, but have only scanned thru the post, and did not see anything that looked like it would accomplish me desired goal.
Cheers
Similar Threads:
heloo respectfull frnds..frnds i need heidenhain tnc 151 post processor for mastercam X5..
that's an easy fix.
If you post a copy of your post processor file here, i'll be happy to show you how to fix that
MasterCam since V6.12a. Gcode since 1983.
The nose you punch today may belong to the butt you have to kiss tomorrow.