MasterCam 9 Post Processor help needed

Results 1 to 3 of 3

Thread: MasterCam 9 Post Processor help needed

  1. #1
    Registered
    Join Date
    Jan 2008
    Location
    usa
    Posts
    72
    Downloads
    0
    Uploads
    0

    Default MasterCam 9 Post Processor help needed

    Currently my post will call out the feedrate on the 1st g01 line, but subsequent G01 lines will NOT display the feedrate. I would like for the post to show the feedrate everytime a G01 is called.
    I have no experience writing a post, but have only scanned thru the post, and did not see anything that looked like it would accomplish me desired goal.
    Cheers

    Similar Threads:


  2. #2
    anayat's Avatar
    Join Date
    Oct 2018
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    heloo respectfull frnds..frnds i need heidenhain tnc 151 post processor for mastercam X5..



  3. #3
    Registered ObrienDave's Avatar
    Join Date
    Jun 2005
    Location
    USA
    Posts
    305
    Downloads
    0
    Uploads
    0

    Default Re: MasterCam 9 Post Processor help needed

    that's an easy fix.
    If you post a copy of your post processor file here, i'll be happy to show you how to fix that

    MasterCam since V6.12a. Gcode since 1983.
    The nose you punch today may belong to the butt you have to kiss tomorrow.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

MasterCam 9 Post Processor help needed

MasterCam 9 Post Processor help needed