OSP Okuma POST PROCESSOR MASTERCAM 2018


Results 1 to 4 of 4

Thread: OSP Okuma POST PROCESSOR MASTERCAM 2018

  1. #1
    Jaderson's Avatar
    Join Date
    Jul 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default OSP Okuma POST PROCESSOR MASTERCAM 2018

    Hi,

    Someone has the post processor OSP P300M OKUMA to MasterCam 2018 to share?
    Thanks in advance



  2. #2

    Default Re: OSP Okuma POST PROCESSOR MASTERCAM 2018

    I know this is a kinda of a late reply but I hope it helps someone.

    Only Okuma post I have.

    Attached Files Attached Files


  3. #3
    Member vfrasson's Avatar
    Join Date
    Sep 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: OSP Okuma POST PROCESSOR MASTERCAM 2018

    Hello TampaCNC, thank you for the okuma post files !!! Did you tested some of this post processor?



  4. #4

    Default Re: OSP Okuma POST PROCESSOR MASTERCAM 2018

    works fine for me.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

OSP Okuma POST PROCESSOR MASTERCAM 2018

OSP Okuma POST PROCESSOR MASTERCAM 2018

OSP Okuma POST PROCESSOR MASTERCAM 2018