Need Help! UG NX5 postprocessor for OSAI 10 / 510 S - 5 axis


Results 1 to 2 of 2

Thread: UG NX5 postprocessor for OSAI 10 / 510 S - 5 axis

  1. #1
    Registered
    Join Date
    Mar 2009
    Location
    Brasil
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default UG NX5 postprocessor for OSAI 10 / 510 S - 5 axis

    Hello!

    I need the following post processor:
    comand: OSAI 10 / 510 S
    machine: CMS Sintesy 56-26 MPT 5 axis
    CAD/CAM: Unigraphics NX5

    I hope you can help me!
    Thanks a lot & regards,
    Rodrigo

    Similar Threads:


  2. #2
    Member ngmajid's Avatar
    Join Date
    Jul 2014
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default Re: UG NX5 postprocessor for OSAI 10 / 510 S - 5 axis

    Hi
    I need same post for same software too
    But if not please send this post for any cam software.
    Thanks
    Telegram = @mj_amiri
    email : ngmajid@gmail.com



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

UG NX5 postprocessor for OSAI 10 / 510 S - 5 axis

UG NX5 postprocessor for OSAI 10 / 510 S - 5 axis

UG NX5 postprocessor for OSAI 10 / 510 S - 5 axis