Fanuc o-p turret punch

[Brenton_buddy]

Hello

Kinda new to all this stuff
Just wondering if someone could help brought a turret punch and i need the post processor file for a Fanuc series o-p

Does any one have one can you please upload for me


Thanks Brenton

Similar Threads:

• Need Help!- Murata wiedemann Centrum 2000 turret punch, Fanuc 0p controller
• Need parameters for Murata Centrum 2000 turret punch (Fanuc 0p B controller)
• CNC Turret Punch Retrofit
• turret punch programming
• Turret Punch Retrofit

[truyens]

i use cam2005 for a murata wiedeman 3000/q i don't know if you can do anything with my postprocesor file

[nikhilpb]

hi,
i have murata wiedemann 3000/q, so i facing some error while i punching ,..." 2012 RAM NOT AT TDC"Do you have any solution..

[XTCNC]

hi,
i have murata wiedemann 3000/q, so i facing some error while i punching ,..." 2012 RAM NOT AT TDC"Do you have any solution..

Try to run the same program without a sheet, your punch may be blunt or the die worn

[youngminzzang]

1. Correct the data of tdc controller data no.8(low brake) no.10(low nbl)- fanuc 0-pb, 00-p
2. Checking the belt tension of the press motor or change belt.