Build Thread- Making PostProcessor for Planet CNC TNG.
Member
Making PostProcessor for Planet CNC TNG.
Hello.
I am making a new post processor for the Planet CNC TNG software. I've had some issues with the post processor that is supplied with the software.
I have added the post processor and a test file from sheetcam with G code.
Can anyone tell me if this G code would work ?
N0070G00 X6.3880 Y6.3880
N0080 M08
N0090 M11P0 G38.2 Z-1000 F1250
N0100 G91 G01 Z-1.6
N0110 M11P1 G90
N0120 M72
N0130 M71
N0140 G00 Z3.8000
N0150 M03
N0160G04 P0.2
N0170G01 Z1.5000 F2500.0
The post is with Floating head, but I am unsure if the code in here is correct. Any ideas?
Also in the post processor I tried adding settings in the start like "Switchoffset and Workoffsetspeed" and then using the code below:
--Put your switch offset value here in MILLIMETRES
switchOffset = 2.5
post.Text (" M11P0 G38.2 Z-1000 F#<Workoffsetspeed>\n")
post.Text (" G91 G01 Z[+#<Switchoffset>]\n")
But this did not work. Any tips here? I would like to make it so people can add settings in the beginning of the pp that will be referenced in the code itself. I would also like to add "reference distance" if the torch has travelled x amount. Similar Threads:
Attached Files
Build Thread- Making PostProcessor for Planet CNC TNG.
Tags for this Thread
Posting Permissions
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
Forum Rules