Try changing the IJ mode in general config.
Hi,
I'm trying to test my plasma cutter and having a bit oh trouble with the post processing,
Could anybody help me by identifying the reason that my post processor keeps putting these circles in my gcode, When I use the simulate in sheet cam it's not there but when I load it into
Mach3 it then appears, see the picture below...
I'm running a floating head, and using the mach3 plasma & stencil THC and also the mp1000 THC.
Code? NO180.....................???
.[IMG]https://www.cnczone.com/forums/attachment.php?attachmentid=440866&stc=1[/IMG]
Similar Threads:
Try changing the IJ mode in general config.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thanks, im a noob :)