Need Help! z. bavelloni Egar 101-s cnc


Results 1 to 2 of 2

Thread: z. bavelloni Egar 101-s cnc

  1. #1
    *Registered User* nobil's Avatar
    Join Date
    Sep 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default z. bavelloni Egar 101-s cnc

    hi, i disperately need a postprocessor for this stone cnc: the easycad/egarcam software included with the machine is very old and archaic, so i need to interface the cnc with a new cam software like artcam or type 3.
    nobody have been good to help me with this problem, so i write here.

    sorry for my bad english

    Similar Threads:


  2. #2
    Member
    Join Date
    Aug 2010
    Location
    VENEZUELA
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default

    [QUOTE=nobil;2215256]hi, i disperately need a postprocessor for this stone cnc: the easycad/egarcam software included with the machine is very old and archaic, so i need to interface the cnc with a new cam software like artcam or type 3.
    nobody have been good to help me with this problem, so i write here.

    sorry for my bad english[/QUOTE]

    To draw the part you can use Autocad or any dxf software, but then you need to assign the jobs to each vector with the tool, and you must use the Easycam bavelloni software, easytool.

    you must have a pc with windows 98, or XP



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

z. bavelloni Egar 101-s cnc

z. bavelloni Egar 101-s cnc