- Need Help!- Postprocesor - Sheetcam; Mach3; Floating head; Proma THC 150
-
Registered
Postprocesor - Sheetcam; Mach3; Floating head; Proma THC 150
Hi,
I made CNC plasma 2000x1000mm with floating head.
Now I stuck with postprocesor and need some help.
I have:
Sheetcam
Mach3
Proma THC 150
CNC with floating head
So, my XYZ home switches are connected together to pin 12, floating head switch to pin 10, Torch UP/DWN to pin 11/13.
Does anybody have postprocesor for this configuration?
Similar Threads:
-
- Need Help!- Postprocesor - Sheetcam; Mach3; Floating head; Proma THC 150
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules