Did you find what you were looking for? I would like to have a copy if you did get one as well as any if not all of the posts' you have for Gibbs. I am collecting a library and checking it for duplcates to make a community Master list...
Hi
Can anyone help me with a Post processor file (.pst, not PostHaste) for a Femco Durga 25 with fanuc 0TC. A generic 0T would be great, however if I could find a processor custom to the 24 station turret That would be wonderful. The ID turret needs to be on T0100 to index the OD turret and the OD turret needs to be on T2100 to index the ID Turret. If anyone can help, I would greatly appreciate it.
Thanks
CCAJohn
Similar Threads:
Did you find what you were looking for? I would like to have a copy if you did get one as well as any if not all of the posts' you have for Gibbs. I am collecting a library and checking it for duplcates to make a community Master list...
Hi, I am trying to build a DIY CNC mill using (Cortex stepper 2 axis control from RS Components) and would like to run this in GibbsCam - is this possible? I am new to this sort of thing so any help would be great. I think I need a Post Processor?
Last edited by irwintools; 05-26-2008 at 05:00 PM.
Looking for one as well to post to a HAAS VM3 from gibbscam any luck?
Here is a post processor for a fadal. If you need any other post processors for GibbsCam just let me know. I have been using the software since Virtual Gibbs. Many years now.
If you look through my old posts, at one time, I posted about 1900 variations on GibbsCam posts. I do not know if one you can use is there, but you are welcome to look.
i have abunch for dostek we use it with gibbscam here they are if you need dostek to just try i can help you pm me if you need that i love it
Hey,
We bought:
Multiplex 6100 - Mazatrol 640T
Need Gibbscam Post Processor.
loleczek196@wp.pl
thx.
Do you have a post for a Haas ST10Y turning center?
Thanks!
----- <a href="http://www.cambridgemachine.com"> CNC Machine Shop Portland, OR</a>
Looking for a Gibbs Post for a Haas ST 10Y Thank you!
----- <a href="http://www.cambridgemachine.com"> CNC Machine Shop Portland, OR</a>
Good day. I have 3 axis machining center ZPS MCFV 1680 MC control system Acramatic A2100 and I need it for GibbsCAM post processor. Can you please help?
Thank you for your answer, best regards
Hruška Martin
aimartinhruska@gmail.com
I need Help,
I need a post processor for GibbsCam for a Nardini lathe with Fanuc 20T control.
Thanks.
Last edited by LIGAMEC CORP.; 03-12-2014 at 02:40 PM.
does anyone have gibbs postprocessors for lathes - haas, doosan and okuma?
I'm sorry those files i posted are all Gibbscam .PST files except i think one so you guys need to download them and see if any will help you i cant say for sure but they could possibly help.
mike
Hello,
I need Fanuc OI posprocessor *.pst file. Can you help me
Thanks
THANK YOU SO MUCH