Need a postprocessor for gibbscam


Results 1 to 13 of 13

Thread: Need a postprocessor for gibbscam

  1. #1
    Registered
    Join Date
    Sep 2006
    Location
    canada
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Need a postprocessor for gibbscam

    Hi Guys

    I am new in here, I am in need for a postprocessor for acramatic 2100 control. I am currently using gibbscam 2005 v7.7. Can anybody in here help.

    Similar Threads:


  2. #2
    Member
    Join Date
    Jul 2005
    Location
    USA
    Posts
    2415
    Downloads
    0
    Uploads
    0

    Default

    Sorry, this is a SheetCAM forum which is a 2D/ 2.5D CAM program. The Post processors are for the SheetCAM application



  3. #3
    Registered
    Join Date
    Dec 2005
    Location
    mayaguez
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default

    If you need, the post procesor please write again because i haved various post for gibbs cam and another software, included acramatic 2100.

    i hope .i can help you



  4. #4
    Registered
    Join Date
    Sep 2006
    Location
    canada
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Yes I still do

    Your help would be greatly appreciated. I am still in the need for a gibbscam post for the acramatic 2100 control.



  5. #5
    Registered
    Join Date
    Sep 2006
    Location
    canada
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Thank You

    I appreciate it a lot. Thank You Very much, You definately give me a good start with gibbscam. If you need a software or a file, dont hesitate to ask. If I have it I would definately send it to you. I live in canada.



  6. #6
    Registered
    Join Date
    Dec 2005
    Location
    peru
    Posts
    74
    Downloads
    0
    Uploads
    0

    Default

    [QUOTE=richrod;211749]Hi pgman68

    I live in Puerto Rico, but i try to help you

    In this file I send two files. one for lathe and the other for milling. If you need help don't doubt to contact me.[/QUOTE]

    Hi guy, do you have a mcx post to HAAS lathe?

    Thanks from Peru.

    Alain



  7. #7
    Registered
    Join Date
    Dec 2005
    Location
    mayaguez
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Gibbs Post

    Alain Aleman
    Happy New Year From Puerto Rico

    Yes I have it,

    What is your control or lathe model? because i got various post.



  8. #8
    Registered
    Join Date
    Dec 2005
    Location
    peru
    Posts
    74
    Downloads
    0
    Uploads
    0

    Default

    [QUOTE=richrod;236475]Alain Aleman
    Happy New Year From Puerto Rico

    Yes I have it,

    What is your control or lathe model? because i got various post.[/QUOTE]

    Hi Richrod, happy new year too.

    Thanks for your attention, my HAAS lathe is a TL-3 model with HAAS control.

    Thank you again and greetings from Peru.

    Alain



  9. #9
    Registered vizient's Avatar
    Join Date
    Jul 2006
    Location
    usa
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Gibbs Post

    Hey Im Looking For A Gibbs Cam Post For A Centurion 6 Sls On A Milltronics 3 Axis With Out A Tool Changer Can Anybody Help Me



  10. #10
    Registered
    Join Date
    Jan 2008
    Location
    USA
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default

    [quote=vizient;237379]Hey Im Looking For A Gibbs Cam Post For A Centurion 6 Sls On A Milltronics 3 Axis With Out A Tool Changer Can Anybody Help Me[/quote]

    Hello, I will check the control on our Milltronics. Is it a old machine? :)

    Chad


  11. #11
    Registered
    Join Date
    Sep 2007
    Location
    USA
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Gibbscam post

    Do you have a Gibbscam post for an anilam crusader 2L ?



  12. #12
    Registered
    Join Date
    Feb 2008
    Location
    GREECE
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Hi,Guys
    Please help
    i need a postprocessor for Gildemeister Nef Ct40 EPL2
    for GibbsCam 2006
    Thanks.



  13. #13
    Member crewedup1's Avatar
    Join Date
    May 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    [QUOTE=pgman68;212672]I appreciate it a lot. Thank You Very much, You definately give me a good start with gibbscam. If you need a software or a file, dont hesitate to ask. If I have it I would definately send it to you. I live in canada.[/QUOTE]

    I am in need of post processing files for Gibbscam. Can you help me please!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need a postprocessor for gibbscam

Need a postprocessor for gibbscam

Need a postprocessor for gibbscam