All Post Processors

Page 1 of 18 123411 ... LastLast
Results 1 to 20 of 352

Thread: All Post Processors

  1. #1
    Member
    Join Date
    Mar 2011
    Location
    Romania
    Posts
    68
    Downloads
    0
    Uploads
    0

    Default All Post Processors

    I am new on here, and I want to start something, like all of us to put all our post processors in here, like:
    First you write the program for what works the processors, and then to atach them.
    I will start first!

    SolidCam:

    Hope you enjoy them and waiting for yours.

    P.S.:For Moderator: "If nobody will post postprocessor in one weak, and only download them, please delete this post!"
    P.P.S.:I do this because of the cheaters!

    Thanks!

    Similar Threads:
    Attached Files Attached Files


  2. #2
    Member
    Join Date
    Mar 2011
    Location
    Romania
    Posts
    68
    Downloads
    0
    Uploads
    0

    Default

    Nobody?



  3. #3
    Moderator Novec's Avatar
    Join Date
    Oct 2004
    Location
    Trondheim
    Posts
    272
    Downloads
    0
    Uploads
    0

    Default

    Welcome to CNC Zone, claudiu!

    Being a complete CAM noob, I have nothing to contribute at the moment, but I definitely support your initiative! Having it all at one place would make the post processor mess a whole lot easier.

    Thanks,
    Lars

    - Lars Bjerke
    CNC-ing an SX3 to make a full-size CNC router to make some speakers. Why do it simple?


  4. #4
    Registered
    Join Date
    Sep 2007
    Location
    Norway
    Posts
    99
    Downloads
    0
    Uploads
    0

    Default

    Don't have much to contribute with, but many thanks for the files :-D
    I only have the files that comes with SolidCam and one MACH3 file that is not mine but modified so I can use it.

    Runar Holm, Norway
    www.maxmekker.com


  5. #5
    Registered
    Join Date
    May 2011
    Location
    USA
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Heres the only one I have its Matsuura I80 it works for 5 axis positioning not sure about simultaneous

    Attached Files Attached Files


  6. #6
    Registered
    Join Date
    Apr 2011
    Location
    Australia
    Posts
    95
    Downloads
    0
    Uploads
    0

    Default

    i need one that does a fadal vmc 4020 with a cnc 88hs



  7. #7
    Registered
    Join Date
    Nov 2011
    Location
    Italia
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Buongiorno a tutti... avrei bisogno se qualcuno puo' aiutarmi di un post processor dell'heidenhain tnc 426 430 per cimatronE ... che mi faccia impostare la tolleranza della macchina cioè questa (1 CYCL DEF 32.0 TOLERANZA
    2 CYCL DEF 32.1 T0.02) e il refrigerante interno ossia M28



  8. #8
    Registered
    Join Date
    Oct 2011
    Location
    Romania
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default post processor

    Hello,
    hope I can help
    fanuc 0m post p and tnc post p for heidenhain
    here are my post processors that I use with Vero Visi 19 , working on Fanuc 0M and 18M, and on fadal 88HS, but with head ake on the last one. Does any one have a compatibe post processor that will work on fadal , with Visi19? Thanks

    Attached Files Attached Files


  9. #9
    Member
    Join Date
    Mar 2011
    Location
    Romania
    Posts
    68
    Downloads
    0
    Uploads
    0

    Default

    [quote=MaxMekker;922097]Don't have much to contribute with, but many thanks for the files :-D
    I only have the files that comes with SolidCam and one MACH3 file that is not mine but modified so I can use it.[/quote]

    Hy man,
    Can you send me Mach3 post please?



  10. #10
    Registered
    Join Date
    Sep 2007
    Location
    Norway
    Posts
    99
    Downloads
    0
    Uploads
    0

    Default

    Mach3 SolidCam files that I use.
    4th axis that I mentioned earlier I don't have the owners permission to upload as he paid a lot for it.

    Attached Files Attached Files
    Runar Holm, Norway
    www.maxmekker.com


  11. #11
    Member
    Join Date
    Mar 2011
    Location
    Romania
    Posts
    68
    Downloads
    0
    Uploads
    0

    Default

    [quote=MaxMekker;1109455]Mach3 SolidCam files that I use.
    4th axis that I mentioned earlier I don't have the owners permission to upload as he paid a lot for it.[/quote]

    Thanks for your pp. I also paid a lot for my posts, but F*** with payng the posts.
    Let everybody use them.
    I also have post for DMG DMC 635V with sinumerik 840d. If somebody want them I can upload.



  12. #12
    Registered
    Join Date
    Nov 2008
    Location
    Ireland
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    My humble offering, an Alphacam post for a Heidenhain 407 on a 3 axis mill. Good thread Claudiu!



  13. #13
    Member
    Join Date
    Mar 2011
    Location
    Romania
    Posts
    68
    Downloads
    0
    Uploads
    0

    Default

    [quote=pabrier;1132750]My humble offering, an Alphacam post for a Heidenhain 407 on a 3 axis mill. Good thread Claudiu![/quote]

    Hy man,
    Thanks for your pp, but where is it? and you did not mentioned for what CAM Software is it!
    In my first post, I mentioned that thouse are for SolidCam.
    Wait for your post!
    Have a grreat day!



  14. #14
    Registered
    Join Date
    Sep 2012
    Location
    U.S.A.
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    I have some posts for Fadal 3016, HAAS VF-1, Mikron, and Bostomatic from Mastercam. Would those help? I would trade them for a post for a Leadwell with a Mitsubishi control Maldas 3. ANybody?



  15. #15
    Registered
    Join Date
    Oct 2011
    Location
    Greece
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default

    Hello i am Student and i want a postprocessor for Gildemeister CTX 310 for educational use. Please help me .



  16. #16
    Registered
    Join Date
    Nov 2011
    Location
    Finland
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Anybody got a mastercam post working with emcotronic tm02 (VMC100)?

    cf_tech



  17. #17
    Registered
    Join Date
    Feb 2010
    Location
    USA
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    [quote=claudiu220405;919618]
    Hope you enjoy them and waiting for yours.

    P.S.:For Moderator: "If nobody will post postprocessor in one weak, and only download them, please delete this post!"
    P.P.S.:I do this because of the cheaters!

    Thanks![/quote]

    Hello, We just bought a Laser with a Mitsubishi LC10BV it's from the mid 90's. I see a Mits post listed in your zip file but not sure what it is for.

    Can you tell me what model machine that post is for?

    BTW if I had any post processors I'd be glad to share them.



  18. #18
    Member
    Join Date
    Jan 2013
    Location
    Australia
    Posts
    15
    Downloads
    0
    Uploads
    0

    Default

    Im chasing a post for a DMC 635v using a iTNC530 with edgecam if anyone has one handy. how would I go about buying one if not? are they available online? Or do you generally need to get someone in to set it up?



  19. #19
    Registered
    Join Date
    Nov 2012
    Location
    usa
    Posts
    162
    Downloads
    0
    Uploads
    0

    Default

    Nice topic! I don't have any offerings yet but am looking for HwaCheon ECO 31/Fanuc18T for both Solicam Trial and BobCam full.



  20. #20
    Registered
    Join Date
    Mar 2006
    Location
    USA
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default

    Im looking for a good Anilam 3000 post for mastercam or bobcad



Page 1 of 18 123411 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

All Post Processors

All Post Processors