- All Post Processors
-
12-31-2020, 08:14 AM
#261
Registered
Re: All Post Processors
Hi, Just wondering if you found a post processor ? I'm looking for the same but for 4 axis.
Appreciate your help.
-
-
12-31-2020, 08:15 AM
#262
Registered
Re: All Post Processors
Hi, I'm looking for a post processor for SolidCAM for Mitsubishi M80, 4 axis machine
Any help would be appreciated.
-
01-14-2021, 04:49 PM
#263
Re: All Post Processors
I wonder if anyone has a Hermle C400 itnc530 post for cimatrone. Thank you in advance.
-
01-15-2021, 02:38 PM
#264
Member
hi guys, would anyone have the esprit post processor for okuma lb3000 myw, and maybe even the 3d model? i would be looking for the same thing as multus b300 w II thanks in advance
-
01-16-2021, 03:19 PM
#265
Re: All Post Processors
[QUOTE=Niyazi41;2409405]Hey I am in need of Haas control post processor for Hypermill
[email]niyazi.topcu41@hotmail.com[/email][/QUOTE]
Absolutely untested, I just had it available. be careful!
-
01-18-2021, 09:40 AM
#266
Member
Re: All Post Processors
hellooo l need a help
l need postproc. for sinumerik 840d for solidcam please if any one can help me
-
01-26-2021, 04:56 PM
#267
Member
Re: All Post Processors
hellooo
l need postproc. for Mazak Integrex 200-ST for solidcam please if any one can help me
-
02-13-2021, 05:41 AM
#268
Member
[QUOTE=SRtec;2401246]Hello,
I'm searching for a postprocessor for a 3 axis Leadwell V-30i, Fanuc 0i-Mate-MC for Mastercam X8
thanks[/QUOTE]
did u get the post
If u please send it to me on semoogad.sg@gmail.com
-
02-13-2021, 09:06 AM
#269
Member
Re: All Post Processors
Does anyone have a postprocessor for a Haas ST10Y lathe with y and C axis activated please.
-
02-15-2021, 11:27 PM
#270
Member
Re: All Post Processors
hi guys, I'm looking for the post for Mitsubishi edm wire, and for biglia b438y2 lathe can anyone help me? thanks in advance, my email is cian530@gmail.com
Inviato dal mio MI 8 utilizzando Tapatalk
-
02-20-2021, 09:17 AM
#271
Member
Re: All Post Processors
Hey I have a 2006 Kitamura HX-500i and need to add programs. My older Kiamuras take a CF card to add and remove programs and it is easy to use. On this Kitamura it has the card port but I can not find the card option in the program screen. All it has is Connect,host, and HD-Dir. when I pick host is brings up Available Ethernet- embedded port, and fast ethernet board. Is there a way to turn on the card option like the other machines? If not do I need a program to connect to the system with an Ethernet cable?
-
02-28-2021, 05:11 PM
#272
Member
Re: All Post Processors
Hi guys,
At this link I found a large selection of postprocessors - http://postpro.hicam.net:8060
-
02-28-2021, 05:16 PM
#273
Member
Re: All Post Processors
user: guest
password: guest
-
03-01-2021, 04:38 AM
#274
Member
Re: All Post Processors
thank you for sharing the postprocessors I am looking for the postprocessor .gpp for heidenhain tnc 410 or similar
Emanuele
-
03-02-2021, 03:23 AM
#275
Member
Re: All Post Processors
Hello,
I am new here. We make cam programs with solidworks cam but we have not got the exact postprocess file (fanuc 10 almost good but a lot needs to be rewritten). Our machines run Fanuc 0i D4G1-39.0 and D6G1-39.0. Can anyone help me with this? Thank you!
-
03-14-2021, 10:45 AM
#276
Member
Re: All Post Processors
Hello
i need a post-processor for Deckel Maho dc50v with cn : mitsubishi meldas 530H
THANKS A LOT FRIEND
-
03-19-2021, 09:43 PM
#277
Activation process
Re: All Post Processors
post spinner u 620 840D!!! help
-
03-22-2021, 10:49 AM
#278
Member
Re: All Post Processors
Hi to all!!
Somebody could help me? I'm looking for post processor of Biesse Rover 35 for Alphacam.
Thanks!!
-
03-23-2021, 08:32 PM
#279
Member
Re: All Post Processors
Hello!! Does anyone have a post processor for Hass UMC-750 on mastercam? please?
-
03-25-2021, 04:07 AM
#280
Member
Re: All Post Processors
hello,
I need a HAAS UMC 750 post processor for 5-axis solidcam.
thank you very much.
arabamitsubishi@gmail.com
- All Post Processors
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules