All Post Processors - Page 14

Page 14 of 18 FirstFirst ... 411121314151617 ... LastLast
Results 261 to 280 of 352

Thread: All Post Processors

  1. #261
    Registered
    Join Date
    Nov 2012
    Location
    Lebanon
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: All Post Processors

    Hi, Just wondering if you found a post processor ? I'm looking for the same but for 4 axis.
    Appreciate your help.



  2. #262
    Registered
    Join Date
    Nov 2012
    Location
    Lebanon
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: All Post Processors

    Hi, I'm looking for a post processor for SolidCAM for Mitsubishi M80, 4 axis machine
    Any help would be appreciated.



  3. #263

    Default Re: All Post Processors

    I wonder if anyone has a Hermle C400 itnc530 post for cimatrone. Thank you in advance.



  4. #264
    Member Bracci's Avatar
    Join Date
    Jan 2021
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default

    hi guys, would anyone have the esprit post processor for okuma lb3000 myw, and maybe even the 3d model? i would be looking for the same thing as multus b300 w II thanks in advance



  5. #265

    Default Re: All Post Processors

    [QUOTE=Niyazi41;2409405]Hey I am in need of Haas control post processor for Hypermill
    [email]niyazi.topcu41@hotmail.com[/email][/QUOTE]


    Absolutely untested, I just had it available. be careful!



  6. #266
    Member tram11's Avatar
    Join Date
    Jan 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: All Post Processors

    hellooo l need a help

    l need postproc. for sinumerik 840d for solidcam please if any one can help me



  7. #267
    Member vukadonis's Avatar
    Join Date
    Jul 2008
    Location
    Reutlingen
    Posts
    31
    Downloads
    0
    Uploads
    0

    Default Re: All Post Processors

    hellooo

    l need postproc. for Mazak Integrex 200-ST for solidcam please if any one can help me



  8. #268
    Member Semoogad's Avatar
    Join Date
    Feb 2021
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    [QUOTE=SRtec;2401246]Hello,

    I'm searching for a postprocessor for a 3 axis Leadwell V-30i, Fanuc 0i-Mate-MC for Mastercam X8

    thanks[/QUOTE]
    did u get the post
    If u please send it to me on semoogad.sg@gmail.com



  9. #269
    Member Gixxerk3's Avatar
    Join Date
    Sep 2019
    Posts
    2
    Downloads
    1
    Uploads
    0

    Default Re: All Post Processors

    Does anyone have a postprocessor for a Haas ST10Y lathe with y and C axis activated please.



  10. #270
    Member Bracci's Avatar
    Join Date
    Jan 2021
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Re: All Post Processors

    hi guys, I'm looking for the post for Mitsubishi edm wire, and for biglia b438y2 lathe can anyone help me? thanks in advance, my email is cian530@gmail.com

    Inviato dal mio MI 8 utilizzando Tapatalk



  11. #271
    Member shitamura's Avatar
    Join Date
    Feb 2021
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: All Post Processors

    Hey I have a 2006 Kitamura HX-500i and need to add programs. My older Kiamuras take a CF card to add and remove programs and it is easy to use. On this Kitamura it has the card port but I can not find the card option in the program screen. All it has is Connect,host, and HD-Dir. when I pick host is brings up Available Ethernet- embedded port, and fast ethernet board. Is there a way to turn on the card option like the other machines? If not do I need a program to connect to the system with an Ethernet cable?



  12. #272
    Member soltan75's Avatar
    Join Date
    Feb 2021
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: All Post Processors

    Hi guys,
    At this link I found a large selection of postprocessors - http://postpro.hicam.net:8060



  13. #273
    Member soltan75's Avatar
    Join Date
    Feb 2021
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: All Post Processors

    user: guest
    password: guest



  14. #274
    Member bocciolo's Avatar
    Join Date
    Mar 2021
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: All Post Processors

    thank you for sharing the postprocessors I am looking for the postprocessor .gpp for heidenhain tnc 410 or similar
    Emanuele



  15. #275
    Member Tejgla's Avatar
    Join Date
    Mar 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: All Post Processors

    Hello,
    I am new here. We make cam programs with solidworks cam but we have not got the exact postprocess file (fanuc 10 almost good but a lot needs to be rewritten). Our machines run Fanuc 0i D4G1-39.0 and D6G1-39.0. Can anyone help me with this? Thank you!



  16. #276
    Member Mammed's Avatar
    Join Date
    Nov 2019
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default Re: All Post Processors

    Hello
    i need a post-processor for Deckel Maho dc50v with cn : mitsubishi meldas 530H
    THANKS A LOT FRIEND



  17. #277
    Activation process aymenaicha's Avatar
    Join Date
    Dec 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: All Post Processors

    post spinner u 620 840D!!! help



  18. #278
    Member fedewhite88's Avatar
    Join Date
    Mar 2021
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: All Post Processors

    Hi to all!!
    Somebody could help me? I'm looking for post processor of Biesse Rover 35 for Alphacam.
    Thanks!!



  19. #279
    Member
    Join Date
    Jun 2017
    Location
    United States
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: All Post Processors

    Hello!! Does anyone have a post processor for Hass UMC-750 on mastercam? please?



  20. #280
    Member razordazor's Avatar
    Join Date
    Mar 2021
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default Re: All Post Processors

    hello,
    I need a HAAS UMC 750 post processor for 5-axis solidcam.
    thank you very much.
    arabamitsubishi@gmail.com



Page 14 of 18 FirstFirst ... 411121314151617 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

All Post Processors

All Post Processors