All Post Processors

[Tulak]

Hi I need a post for Machine: YCM
CAM:Cimatron
Anybody can help me please.
Thanks

[syjsoc]

Hello,
I'm looking for Solidcam post processor for mitsubishi 70.

Or [email] syj_soc@hotmail.com [/email]

Any help would be great.

Thanks

[josewe]

Looking for a SCM Sigma 65 post

[hayo2019]

Hi all
I need a post processor for machine HAAS DT-1 and Mitsubishi M70 for SolidCam 2019 SP3 thanks for your help.

[totoldy37]

[FONT=arial]Hello! someone would have a post processor for a 30x wmx hurco in 5 simultaneous axes( for solidcam)? Thank you! (sorry for google traduction =) )[/FONT]

[paulclements64]

Need Homag Weeke post processor for Alphacam

[shokrymm]

SIEMENS 808D POST PROCESSOR FOR artcam

[vrej]

hi everyone
i have sodick A530D EX21 ,
when i turn the machine ,it give me error E229 .anybody know what is this ?

[tiagosjc]

Hello good afternoon.

Does anyone have the post processor for Mazak Mplus 4 axis vrt (iso m32), for Mastercam.

[shineworld]

A generic Fanuc 5 axis table-table AC for EdgeCAM with RTCP (G43.4).
Have some one a skeleton of this post-processor ?

[Benplarina]

Hello everyone, I am new to this forum.

I have a post process question for WorkNC. I am in need of making my post processor post tapping cycles.
I will post a non edited file that come straight from the WorkNC that does not even work on my machine and one that I edited to use G84 that works correctly.

So what I am looking for is to try to edit my post to come out with the G84 and the points of the holes.

Can anyone help me with this?

Thanks

[Doc81Brown]

Hello everyone, I am new to this forum.
I need some help.
I need Haas Lathe st20 Post Processor for Mastercam 2017 and 2019.

Someone can help me?

Thank you.

[nidershan]

please send me i wold be a great help. i Have the same machine. thanks in advance


[QUOTE=claudiu220405;1110784]Thanks for your pp. I also paid a lot for my posts, but F*** with payng the posts.
Let everybody use them.
I also have post for DMG DMC 635V with sinumerik 840d. If somebody want them I can upload.[/QUOTE]

[Loicov77]

Hi,

I am new on this forum, sorry for my bad english... :)
I need a postprocessor for HAAS ST-10 with rotary tool and C axis for gibbscam, if you have this one, I am very very happy ! :)

Best regards

Dan

[sukh_bhuee]

hi guys i am looking for Biesse rover b 7.40ftk post processor xp600 for cabinet vision if some one can help me this out.
thank you

[jaby123]

hello,
does anybody have
fanuc 21t (lathe)
(machine is takisawa '94)
(solidcam)

[Maroslav4]

[QUOTE=sukh_bhuee;2334169]hi guys i am looking for Biesse rover b 7.40ftk post processor xp600 for cabinet vision if some one can help me this out.
thank you[/QUOTE]

Yes, you can contact me if you still interested.

[Buckeyegolfer75]

Does anyone have an edgecam post for a 2019 Haas VF11 3 axis mill, or just a 2016 or newer Haas VF 3 axis mill post? You can send to [email]chrisa@afinc.co[/email] Thank you very much for your help

[wkliw]

Hi my friends
I'm looking for SolidCAM PP bridgeport VMC Heidenhein tnc410
wkliw@o2.pl

[wkliw]

Hi my friends
I'm looking for SolidCAM PP bridgeport VMC Heidenhein tnc410
wkliw@o2.pl