Hello,
I'm looking for Solidcam post processor for mitsubishi 70.
Or [email] syj_soc@hotmail.com [/email]
Any help would be great.
Thanks
Hi I need a post for Machine: YCM
CAM:Cimatron
Anybody can help me please.
Thanks
Hello,
I'm looking for Solidcam post processor for mitsubishi 70.
Or [email] syj_soc@hotmail.com [/email]
Any help would be great.
Thanks
Hi all
I need a post processor for machine HAAS DT-1 and Mitsubishi M70 for SolidCam 2019 SP3 thanks for your help.
[FONT=arial]Hello! someone would have a post processor for a 30x wmx hurco in 5 simultaneous axes( for solidcam)? Thank you! (sorry for google traduction =) )[/FONT]
SIEMENS 808D POST PROCESSOR FOR artcam
hi everyone
i have sodick A530D EX21 ,
when i turn the machine ,it give me error E229 .anybody know what is this ?
Hello good afternoon.
Does anyone have the post processor for Mazak Mplus 4 axis vrt (iso m32), for Mastercam.
A generic Fanuc 5 axis table-table AC for EdgeCAM with RTCP (G43.4).
Have some one a skeleton of this post-processor ?
Hello everyone, I am new to this forum.
I have a post process question for WorkNC. I am in need of making my post processor post tapping cycles.
I will post a non edited file that come straight from the WorkNC that does not even work on my machine and one that I edited to use G84 that works correctly.
So what I am looking for is to try to edit my post to come out with the G84 and the points of the holes.
Can anyone help me with this?
Thanks
Hello everyone, I am new to this forum.
I need some help.
I need Haas Lathe st20 Post Processor for Mastercam 2017 and 2019.
Someone can help me?
Thank you.
please send me i wold be a great help. i Have the same machine. thanks in advance
[QUOTE=claudiu220405;1110784]Thanks for your pp. I also paid a lot for my posts, but F*** with payng the posts.
Let everybody use them.
I also have post for DMG DMC 635V with sinumerik 840d. If somebody want them I can upload.[/QUOTE]
Hi,
I am new on this forum, sorry for my bad english... :)
I need a postprocessor for HAAS ST-10 with rotary tool and C axis for gibbscam, if you have this one, I am very very happy ! :)
Best regards
Dan
hi guys i am looking for Biesse rover b 7.40ftk post processor xp600 for cabinet vision if some one can help me this out.
thank you
hello,
does anybody have
fanuc 21t (lathe)
(machine is takisawa '94)
(solidcam)
[QUOTE=sukh_bhuee;2334169]hi guys i am looking for Biesse rover b 7.40ftk post processor xp600 for cabinet vision if some one can help me this out.
thank you[/QUOTE]
Yes, you can contact me if you still interested.
Postprocessors, VBA macros, .NET programming.
www.ccsoftcz.com
Does anyone have an edgecam post for a 2019 Haas VF11 3 axis mill, or just a 2016 or newer Haas VF 3 axis mill post? You can send to [email]chrisa@afinc.co[/email] Thank you very much for your help
Hi my friends
I'm looking for SolidCAM PP bridgeport VMC Heidenhein tnc410
wkliw@o2.pl
Hi my friends
I'm looking for SolidCAM PP bridgeport VMC Heidenhein tnc410
wkliw@o2.pl