Baluster.
More original legs :-)
www.new.4dwood.ru
www.carvedbalusters.ru
Baluster.
www.new.4dwood.ru
www.carvedbalusters.ru
Chair legs
www.new.4dwood.ru
www.carvedbalusters.ru
Excellent work the table came out great very nice. I also like your machine looks very well built.
http://www.cnczone.com/forums/diy-cnc-router-table-machines/140832-cnc-software.html
Now I make Turn Mill Lathe CNC.
Two cutter + spindle.
As will be made autoload
www.new.4dwood.ru
www.carvedbalusters.ru
First run, slowly...
www.new.4dwood.ru
www.carvedbalusters.ru
Very impressive machine good video.
http://www.cnczone.com/forums/diy-cnc-router-table-machines/140832-cnc-software.html
Acrylic stone baluster
Last edited by burs; 05-09-2022 at 06:27 AM.
www.new.4dwood.ru
www.carvedbalusters.ru
How are you controlling the 4th axis in lathe mode and 4th axis mode? Are you using two different motors? What control software are you using?
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
A axis - the axis of rotation of the cutter 1 - C-axis cutter 2 - axis Y, router - axis Z. uses 2 different maotora on the axis A - first for turning, asynchronous, second stepper drive with harmonical drive.
Switching carries on board made me Pic16F877A. Controlled Mach3.
Last edited by 4dwood; 03-09-2015 at 05:17 AM.
www.new.4dwood.ru
www.carvedbalusters.ru
I have a lot 3d models for cnc carving and 3d printing
ART for CNC
New legs.
Because with requests from other countries want to clarify - Our shop does not work with countries to impose sanctions against the Russian Federation , as well not work with individuals and organizations promote ideas of homosexuality. Sorry.
www.new.4dwood.ru
www.carvedbalusters.ru
nice work dude
<img src="https://ivxo1q-dm2305.files.1drv.com/y4mENMmTr_Cabc7pR0FUdB6gtbADq2JbuG4_rGy0eBQvLJx19pTi6TqMUIJN0xgOyDIc0gWoxYhS38HpbSTFGdfaK-o42IOU6jczrhDpfpCOTNGL1X6hvZCbgj0y35gqmq1YGTrWwShYGV-C7lXA2esy0Pi_WfnBSyroDLSGXwce4uSr1U7op7srdi78rispHCa_K4aFlTlJPVkkNWMfgh_Tg?width=60&height=60&cropmode=none" width="60" height="60" />
Being Disabled is OK CNC is For fuN
www.new.4dwood.ru
www.carvedbalusters.ru
Last edited by 4dwood; 06-01-2015 at 11:06 AM.
www.new.4dwood.ru
www.carvedbalusters.ru
Feet billiard...
www.new.4dwood.ru
www.carvedbalusters.ru
My homemade lathe CNC milling machine in automatic mode.
Turning + Milling balusters first launch automatically, slowly.
check the accuracy of the second turning and milling
the machine has not completed yet and in fact is the machine layout for the experience and debug macros.
www.new.4dwood.ru
www.carvedbalusters.ru