Ez rout vs. Shopsabre vs. Shopbot vs. Digirout vs. Warthog vs. Vortech - Page 3


View Poll Results: Which CNC router Company do you think is best?

Voters
119. You may not vote on this poll
  • Ez router

    20 16.81%
  • Shopsabre

    25 21.01%
  • Shopbot

    46 38.66%
  • Digirout

    4 3.36%
  • Warthog

    5 4.20%
  • Vortech

    19 15.97%
Page 3 of 3 FirstFirst 123
Results 41 to 56 of 56

Thread: Ez rout vs. Shopsabre vs. Shopbot vs. Digirout vs. Warthog vs. Vortech

  1. #41
    Member cncwhiz's Avatar
    Join Date
    Jan 2004
    Location
    Gardnerville,Nevada
    Posts
    258
    Downloads
    0
    Uploads
    0

    Default

    I can't get ahold of the guy. He has a Vortech. It could be a good machine if they would finish their setup. You have to put it together and setup the pc and cables etc... They hooked up the machine and never had it work correctly. Before Christmas Vortech sent him a new driver as that replaced one of the bad one on the Y axis. It blows me away that some of these guys will buy a lowball China POS to make money with. Then when they get it and have no clue how to set it up. They start crying that they are losing money with it? They should buy a machine for a few more bucks that will run when it hits the floor?



  2. #42
    Registered
    Join Date
    Oct 2008
    Location
    USA
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Well I went with a ShopBot because no matter where I turned There was somebody to help.

    IF I e-mail them I have a responce with in the hour even if its just to say "I have 8 e-mails in front of your's I'll get back to you shortly" and they do.

    If I call I can talk to a human (and more times than not the one I want to talk to).

    IF They are closed in Durham I have cell phone numbers of other users and employees who are willing to help.

    It was simply a no brainer for me. THe other machine that was in close contention and not listed in this poll for some reason. Was just to big, bulky, yellow and heavy duty for my needs.

    Yea I buy based on color too......LOL. and Yellow just didn't match my shop decor.



  3. #43
    Registered
    Join Date
    Jan 2009
    Location
    usa
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    sorry for not getting back to you guys in a timely fashion but as i stated before i had to send my computor to "those guys" and it mysteriously got smashed beyond repair so i have been having to go to a friends house to use his computor but as soon as i can get another new computor i will respond to all questions about my router that still does not work. i live in south east Michigan if any one knows some one who is knowledgeable about fixing routers they can call me at 1-517-540-0103 ask for Matt.
    thank you.

    also thanks to the guy who posted the place to get parts from, but i do not know what is wrong with it to even begin to know what parts i would need, hence the frustration with this company as they also do not know what is wrong with thier own router....NICE!

    i have always only wanted and asked for a router that works....yet going on 7 months now and NOTHING.



  4. #44
    Member cabnet636's Avatar
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2466
    Downloads
    0
    Uploads
    0

    Default there is help

    camaster sold the routers until 06 they are distributed in the us under a various names and wher you get it is the crucial factor, there a re some knowledgable persons who can help you and the parts are available in the US.

    but if you purchased it from near the boston area the chances are slim, ebay ain't your friend on this one!! if you go to vectric's forum

    http://www.vectric.com/forum/

    and go to the show us your machine section and scroll down you will see a machine like yours!

    look on page 8

    http://www.vectric.com/forum/viewtopic.php?f=5&t=422

    there is a fellow there who has had some success with the machine

    there are others as well


    jim mcgrew

    Last edited by cabnet636; 01-18-2009 at 11:43 AM.
    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com http://dropc.am/p/EJaKyl


  5. #45
    Member cabnet636's Avatar
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2466
    Downloads
    0
    Uploads
    0

    Default

    here is a router i see often it is here in sc and is used daily to cut cabinetparts

    "http://www.youtube.com/watch?v=15Lih3lZtp4"]YouTube - camaster cnc godwin cabinet shop

    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com http://dropc.am/p/EJaKyl


  6. #46
    Registered
    Join Date
    Oct 2008
    Location
    USA
    Posts
    56
    Downloads
    1
    Uploads
    0

    Default Your Choice of Routers

    norby16

    This thread is quite old but I wonder which did you buy?

    I am interested in comments by users of EZ-ROUTER entry level routers. On their website I see three that fit this description. Does anyone know what price range these are in? I like the HYBRID I see on Joe's website but with limited tools I think I would rather buy something already built.



  7. #47
    Member cabnet636's Avatar
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2466
    Downloads
    0
    Uploads
    0

    Default

    i have a lot of respect for the joes router and am real close to building one to use at home

    "http://www.youtube.com/watch?v=FKXEo2DBHxY&feature=related"]YouTube - 4X4 Router

    you may also want to use the search for ez-router there are other request on the forum for info.

    a good question would be "what do you want to do with your router"?

    jim

    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com http://dropc.am/p/EJaKyl


  8. #48
    Registered
    Join Date
    Oct 2008
    Location
    USA
    Posts
    56
    Downloads
    1
    Uploads
    0

    Default

    Quote Originally Posted by cabnet636 View Post
    i have a lot of respect for the joes router and am real close to building one to use at home


    you may also want to use the search for ez-router there are other request on the forum for info.

    a good question would be "what do you want to do with your router"?

    jim
    Jim,

    Thanks for the quick reply.

    I did as you suggested and came back with nothing current.

    "I am interested in comments by users of EZ-ROUTER entry level routers."

    I have studied the EZ-ROUTER website but cannot see/get enough info to satisfy me so I asked for help by users. I am very familiar with Joe's HYBRID. The drawings are GREAT but, with my limited tools/shop I wonder if starting with almost ready to run would be an alternative. I wish I lived near you and maybe we could build two HYBRIDs at a time.

    I have seen several used ShopBot Buddies that were interesting but were gone in a flash or were a cross country trip.

    Thanks



  9. #49
    Member cabnet636's Avatar
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2466
    Downloads
    0
    Uploads
    0

    Default

    the kit he sells is a well accepted product! it really comes down to what do you wish to produce on a router and the size and space. i did this life size 3d in slices
    jim

    Attached Thumbnails Attached Thumbnails Ez rout vs. Shopsabre vs. Shopbot vs. Digirout vs. Warthog vs. Vortech-img_4178-jpg  
    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com http://dropc.am/p/EJaKyl


  10. #50
    Registered
    Join Date
    Oct 2008
    Location
    USA
    Posts
    56
    Downloads
    1
    Uploads
    0

    Default

    Quote Originally Posted by cabnet636 View Post
    the kit he sells is a well accepted product!

    Point me to someone using one or some details. Websites without prices makes decisions difficult.

    it really comes down to what do you wish to produce on a router and the size and space.

    What if you want to get your feet wet by starting small? I have no interest in using a router for business.

    jim
    Jim if you are interested in Joe's HYBRID give serious consideration to buying the plans as I did. This will allow access to the closed forum. It is filled with many skilled/helpful folks that span the globe. A good group.



  11. #51
    Member cabnet636's Avatar
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2466
    Downloads
    0
    Uploads
    0

    Default

    where i see the most of them is here on vectrics forum joe hil self is active here.

    http://www.vectric.com/forum/index.php

    gallery of machines here

    http://www.vectric.com/forum/viewtopic.php?f=5&t=422

    just enter joes cnc in search, most 4x4 basic cnc (shopbot, ez-router, camaster, shop sabre etc.) are going to run 5-9000 you can build a joes for less than that. just enter joes cnc on you tube there are lots there. joey at camaster built this machine and the owner finished the wiring motors etc himself.

    "http://www.youtube.com/watch?v=2LIqaDUOLtI"]YouTube - CAMaster CNC MC-2840 cutting sign out of solid surface

    jim

    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com http://dropc.am/p/EJaKyl


  12. #52
    Member cabnet636's Avatar
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2466
    Downloads
    0
    Uploads
    0

    Default

    all are welcome to study the info we have posted here as well

    www.camheads.org

    jim

    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com http://dropc.am/p/EJaKyl


  13. #53
    Registered
    Join Date
    May 2009
    Location
    USA
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by norby16 View Post
    Hello,
    I'm looking to buy a " turn key " cnc router from either of the following companies. Based on your knowledge and respect for these/ which would you most likely vote on being the most reliable financially economic cnc router solution. Please feel free to write reasons behind your decisions...

    I've narrowed it down to 3 key players.
    EZ router
    Shopsabre
    Shopbot


    Also theres:
    Digirout - but after their lack of response to most of my emails I got a bad vibe and there outstandingly low prices at first drew me in but now made me suspicious.
    Warthog cnc - Waiting on a quote from them/ have recently found them
    Vortech cnc - Allegedly not too good of a reputation from what I've read on the posts.

    Never the less/ with about 10,000$ to invest. Which would you vote most reliable/ supported / ready to run cnc machine. Personally I'm casting my vote on EZ router.

    I bought a PRSStandard96x48 Shopbot last summer and have been very pleased with it.

    Yes, it comes on a big pallet, and yes, for the basic price you have to assemble it yourself, or you can hire a Shopbot tech to come do it for you at extra cost. The upside is that by assembling the router yourself you intimately know your machine when you are done, and can easily alter, move or recalibrate the table based on the knowledge and experience gained from the initial assembly and calibration. An experienced tech can (metaphorically speaking) hand you the keys in half a day. OTOH, it took me a day to assemble and jig the table with simple hand tools, working slowly and reading everything 3 times. I had never actually seen a Shopbot in person so had no intuitive "feel" for how it goes together. It took another day to mount the gantry (the only part where I needed help -- my petite wife assisted me without drama), wire everything up, load and test the software, etc., and run the wasteboard leveling routine. A pleasant weekend's work and a complete neophite can be cutting their first pieces.

    There is a terrific Shopbot forum (http://www.talkshopbot.com/forum/discus.cgi), and with more than 5000 machines in the field, the well of knowledge and support is truly deep. I have gotten stumped a few times and called/emailed Shopbot's tech folks directly, and they always replied quickly (even after hours emails are forwarded to the "on duty" tech) and had the answer.

    If one really has only $10k to spend and plans to cut flat stock (plywood, plastic sheet, etc.), used 4'x8' PRT models typically go for well under $8-grand. Newer PRS models start a couple of grand more used.

    YMMV, but I am quite satisfied with mine.



  14. #54
    Registered
    Join Date
    Jun 2010
    Location
    United States Of America
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default EZ Router??

    You went with the EZ Router over the Shop Sabre or Shop Bot?? Looks like you gave up a lot of quality, I would have recommended either a Shop Sabre CNC or a Shop Bot due to the machine structures and company backing them. I have had both of those machines and honestly my Shop Sabre has been the best out of them... I love the tech support I get there. The Shop Bot was a good starter machine and I learned a lot on it but it just wouldn't keep up with my needs.. Either way.. They both were better then the EZ router... Good Luck!



  15. #55
    Registered
    Join Date
    Feb 2011
    Location
    United States
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default

    I'd Agree with CarveCreat .... The ShopSabre is a much higher quality system then anyone of those others. It shouldnt surprise you that ShopBot leads the poll because those guys opperate a Forum and are online all the time voting for themself... the ShopSabre does no forum based support and to be second highest voted should show that its a quality product... ShopSabre is hands down the best CNC system on the market for this price range....Good luck with your EZ junk.



  16. #56
    Registered
    Join Date
    Mar 2008
    Location
    BCS Mexico
    Posts
    177
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by CNCUSER51 View Post
    I'd Agree with CarveCreat .... The ShopSabre is a much higher quality system then anyone of those others. It shouldnt surprise you that ShopBot leads the poll because those guys opperate a Forum and are online all the time voting for themself... the ShopSabre does no forum based support and to be second highest voted should show that its a quality product... ShopSabre is hands down the best CNC system on the market for this price range....Good luck with your EZ junk.

    ...made on a 12 yr old pr shopbot which we purchased used for $3500

    no, we do not always vote for shopbot.

    Attached Thumbnails Attached Thumbnails Ez rout vs. Shopsabre vs. Shopbot vs. Digirout vs. Warthog vs. Vortech-custom-panel-5-jpg   Ez rout vs. Shopsabre vs. Shopbot vs. Digirout vs. Warthog vs. Vortech-entry-panels-2-jpg   Ez rout vs. Shopsabre vs. Shopbot vs. Digirout vs. Warthog vs. Vortech-100_7278-jpg  
    Last edited by EBC; 02-17-2011 at 07:10 PM. Reason: had to go feed horses...


Page 3 of 3 FirstFirst 123

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Ez rout vs. Shopsabre vs. Shopbot vs. Digirout vs. Warthog vs. Vortech

Ez rout vs. Shopsabre vs. Shopbot vs. Digirout vs. Warthog vs. Vortech