Who works in manufacturing. programming or machining

[skywalker4]

I have been a machinist for 22 years, now moved into programming with smart cam for two years

[Thad92]

I do it all, programming is my favorite but i also do my own setups and running the machine.

[KH0UJ]

I love custom CAMs, like a spindle commander, AutoCAM bores me, though im still on my second year of experience now on CNC`s but I can safely say on any CNC job you throw at me I can make it for you, it does`nt matter anymore if it`s stainless steel to wood, anyone noticed on china carbide bits are harder than US made carbide bits? last time I used US made carbide bits I resharpen every three days but now on the cheap china carbide bits I resharpen every two weeks? anyone noticed it?

[Thad92]

I am impressed by the German tooling, Guhring in specific.

[beispiel]

I want to go back to sweeping chips next, but I can't pay my bills that way anymore.

[CNCJoseph]

I do it all daily. I started machining in the early 90's, took a break while getting an engineering degree, and am happy to be back at it.

[rcheli]

I started using a small lathe (Unimat) when I was about nine years old. I bought a HF 8x12 Lathe in 2005 then a Sieg X3 mill in 2010. Converted the mill to CNC this year. I am a programmer by profession but not the CNC kind.

[mdcurry1204]

Youngquist Brothers inc. in Ft Myers, FL is seeking an experienced machinist. Experience programming CNC lathes and mills a must. Experience operating manual lathes, mills, and drill presses also required. A candidate can expect to work on various short run projects.

Our current machine selection consists of:

Okuma Captain L370MW CNC lathe with OSP-P100 control with bar feeder
Okuma LH55-N CNC lathe with OSP-E100L control
Okuma OSP700L CNC lathe
Mazak vertical traveling column mill VTC-20B with Mazatrol M plus control
Kuraki KV-2000 CNC vertical machining center mill with a Fanuc series 16-M controller
Work schedule is Monday-Friday, 7am-4pm with an hour for lunch.
Health, dental, vision, and life insurance is offered after 90 days.
Job Type: Full-time
contact Mike Curry 239-489-4444 x212

[Resendiz]

CNC Fanuc machine- accidently I locked in the T handle L ratchet inside the cnc spindle when I was changing jaws. how to unlock the jaw so I can release the T handle L ratchet from spindle head?

[cncmakers001]

We do program, repairing and even retrofit an old machine, change the whole CNC control, AC servo motors and drivers, spindle motor and driver, etc.