- Laser cutting New Year’s decoration with PlanetCNC TNG
-
Member
Laser cutting New Year’s decoration with PlanetCNC TNG
Short tutorial on how to use Image Import feature has been published. It describes how to easily generate suitable gcode for laser cutters using only TNG software.
https://planet-cnc.com/laser-cutting...planetcnc-tng/
If you have any questions, tips or suggestions, let us know
Best regards, Team PlanetCNC
Similar Threads:
-
-
Member
Re: Laser cutting New Year’s decoration with PlanetCNC TNG
doesn't work well
1) the laser turns on too early, before reaching the starting point. because of this, it burns everything in its path
2) nothing is visible on the preview
3) you need to press the preview button 2 times.
better do this for DXF
Last edited by Anriro; 11-23-2022 at 05:54 AM.
-
Member
Re: Laser cutting New Year’s decoration with PlanetCNC TNG
It works very well. You are doing something wrong.
1. You did not set spindle settings correctly
2, 3. Preview toggles between showing processed image and outlined image
You can send me your image and I will make screenshots of whole process
- Laser cutting New Year’s decoration with PlanetCNC TNG
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules