machine stops abruptly

[Anriro]

When manually moving from the keyboard, the machine began to stop abruptly, although the deceleration cost is 200. This happened after updating the firmware and software.

This happens when moving two axes at the same time, one of the axes brakes sharply.

Similar Threads:

• Fanuc 6MB - Spindle abruptly stops, feed continues, breakage ensues.
• Newbie- Steppers acting odd !!! they all abruptly stop, then continue at the same time
• Newbie- Machine Stops or Runs Away
• Machine stops Help!
• I put Carriage stops / E-stops on the x&y Shoptask 1739 Gunmaster....I was bored lol

[PlanetCNC]

Hi,

Thank you for locating and notifying about this bug.
This is now fixed, and it will be ok within the next release.

[PlanetCNC]

New release is available as from today:
[Win] https://planet-cnc.com/wp-content/up...2022-08-12.zip

[Anriro]

and thank you for the quick feedback