Rotary ATC

[DVDvelden]

25-06-2022

Hello All,

I have already 2 maschin working on Planet.

No i like to know how to setup an Rotery ATC system for my new vertical mill!

Please can somebody help me on this. What do i need to get this work.

Or please send me some pics and info on hardware what to be need outside the MK3 board.

Thanks.

Similar Threads:

• Three-step ATC CNC Router with Rotary Device
• 2113 ATC 3D CNC Stone Engraving Machine with Rotary Device
• CNC Machine JCT1330L ATC 4 Axis Rotary - No Longer Available
• New Machine Build- Woodworking ATC CNC Router RC2030S-ATC With Rotary System
• New Machine Build- ATC CNC ROUTER 2030 With Rotary

[awpross]

I havent a working rotary ATC but was thinking of building one. So I have some informations how to start.

1. You need something for rotation which can be controlled by MK3.
Best would be a Stepper or Servo Motor with a reference switch connected to one of the unused Axis output.


2. You will need a cutom M6 script for tool change who should handle the rotation and Pickup. Within that script you will define the pickup location and the step by step procedure to load and unload tools.


The Most intensive Work would be the M6 script. I have already build a cutom one for my ATC, but that's not a rotary.
I may be able to give you some additional tips for the M6 script if required.

[allencncrouter]

do you want flat rotary ATC or just rotary ATC ?
rotary diameter and length demand ?
check some working video link as bellows : suggest this type


just rotary cnc ,then change spindle into ATC spindle ,+linear tool magazine ,


You can contact with me +8618560201508 or omnisales6@omni-cnc.com