Hello everybody,
I resumed using my cnc pantograph after a year of stoppage, I updated TNG V2 to the latest version and I uploaded a gcode of a very simple rectangle. I find myself displaying the whole path wrong. I probably missed something in the various updates of this last year but I can't figure out if it's a setting or a bug. As you can see from the attached images, the piece to be machined is a very simple flat rectangle milled in 4 passes but the display is mirrored and tilted .... where am I wrong?
Any help is very welcome
I haven't changed any parameters since the last time I used it and the display was correct
I use the P.P. of Vectric in the TNG examples but the same thing does it using the P.P. of Mach2 / 3
Marco
Your A axis is not at zero.
In setting "User Interface/3D/Geometry/XYZ" setting "Rotation" is enabled. Because of this 3D display is rotated to match A axis position.
Either disable this setting or set A axis to zero.