ATC Magazine Dialog

Results 1 to 1 of 1

Thread: ATC Magazine Dialog

  1. #1
    Member ScorpionTDL's Avatar
    Join Date
    Aug 2020
    Posts
    131
    Downloads
    0
    Uploads
    0

    Default ATC Magazine Dialog

    After having the chance to play a bit with a machine that has a ATC I quickly noticed that its a bit uncomfortable to set the correct ATC XYZ Values in the Tool Table for the tools that are in the Magazine.
    Therefore I wrote a quick and dirty script to handle this.
    By default 10 Pockets are available, but this can easily be adapted in the script itself.
    The XYZ Positions of the individual pockets needs to be configured correctly in the script (sorry, no fancy gui for that part, but this needs to be done only once)
    Once that is done simply start the dialog and enter the tool number for each pocket.
    This will set the configured XYZ Coordinates for all tools that are configured in the Dialog according to the configuration. All Other tools will be set to XYZ 0 for the ATC.

    The Script can be found on my Github:
    https://github.com/Klaus-Michael/Pla...agazine_Dialog

    Similar Threads:
    Attached Thumbnails Attached Thumbnails ATC Magazine Dialog-atc-dialog-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

ATC Magazine Dialog

ATC Magazine Dialog