Output Board and Adapter for limit switch on MK3: remaining signals?

Results 1 to 6 of 6

Thread: Output Board and Adapter for limit switch on MK3: remaining signals?

  1. #1
    Member Clyde_IT's Avatar
    Join Date
    Nov 2021
    Posts
    35
    Downloads
    0
    Uploads
    0

    Question Output Board and Adapter for limit switch on MK3: remaining signals?

    Hi everyone,
    I've a question: I've a MK3 board and I've bought a Output board for my spindle, and there are on it, more the PWM signal, three relè output.
    How I can use the other output of the board? (I lost 4 outputs, in this way)
    The same for the Adapter for limit switch: there are on the board 4 input, and the other 4?
    (There are in total 8 inputs and 8 inputs on MK3 board, and only 4outputs and 4 inputs on the additional board...)

    Thank's in advance
    Nino

    Similar Threads:


  2. #2
    Member PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    1295
    Downloads
    0
    Uploads
    0

    Default Re: Output Board and Adapter for limit switch on MK3: remaining signals?

    You can make a simple splitter. Something like this:
    https://planet-cnc.com/product/split...put-connector/



  3. #3
    Member Clyde_IT's Avatar
    Join Date
    Nov 2021
    Posts
    35
    Downloads
    0
    Uploads
    0

    Default Re: Output Board and Adapter for limit switch on MK3: remaining signals?

    Ok, thank's.
    The same is for Adapter limit switch board?
    I have to buy another output board o I can use directly the output of the main board?
    Also, I must another Adapter limit board or I can use directy the other input from the main board?
    Nino



  4. #4
    Member Clyde_IT's Avatar
    Join Date
    Nov 2021
    Posts
    35
    Downloads
    0
    Uploads
    0

    Default Re: Output Board and Adapter for limit switch on MK3: remaining signals?

    Quote Originally Posted by Clyde_IT View Post
    Ok, thank's.
    The same is for Adapter limit switch board?
    I have to buy another output board o I can use directly the output of the main board?
    Also, I must another Adapter limit board or I can use directy the other input from the main board?
    Nino
    through the splitter, of course...



  5. #5
    Member PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    1295
    Downloads
    0
    Uploads
    0

    Default Re: Output Board and Adapter for limit switch on MK3: remaining signals?

    You can use inputs/outputs directly from main board. Just make sure you don't draw more than 20mA from outputs. And optoisolation is highly recommended for inputs.



  6. #6
    Member Clyde_IT's Avatar
    Join Date
    Nov 2021
    Posts
    35
    Downloads
    0
    Uploads
    0

    Default Re: Output Board and Adapter for limit switch on MK3: remaining signals?

    ok, thank's again
    Nino



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Output Board and Adapter for limit switch on MK3: remaining signals?

Output Board and Adapter for limit switch on MK3: remaining signals?