External program status on machine using CNC/USB MK3/4 board

Results 1 to 2 of 2

Thread: External program status on machine using CNC/USB MK3/4 board

  1. #1
    Member KETELAARS_WATCHES's Avatar
    Join Date
    Nov 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default External program status on machine using CNC/USB MK3/4 board

    Good day,

    I am using the planet CNC software and board for a few months now, I have to say I am impressed with how steady the system works.

    What I would like to add to my machine is an external program status traffic light in order to show the status from the program on top of the machine instead of checking the information on the bottom right corner of the display.

    Is there an option inside the software to redirect the program status to one of the outputs of the usb/CNC board?

    Thanks in advance,
    Kind regards,
    Team Ketelaars watches.

    I added two pictures of my handmade CNC

    Similar Threads:
    Attached Thumbnails Attached Thumbnails External program status on machine using CNC/USB MK3/4 board-20210916_191533-jpg   External program status on machine using CNC/USB MK3/4 board-20210915_171823-jpg  


  2. #2
    Member PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    1295
    Downloads
    0
    Uploads
    0

    Default Re: External program status on machine using CNC/USB MK3/4 board

    Yes, you can do this. Which status do you want exactly?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

External program status on machine using CNC/USB MK3/4 board

External program status on machine using CNC/USB MK3/4 board